NF Mighty NF forum 2016x>




Author Topic: fork  (Read 346 times)

monohorizontal

  • Newbie
  • *
  • Posts: 38
    • View Profile
fork
« on: June 09, 2020, 08:52:38 pm »
good evening I do not know if the subject on the fork springs too weak on the falcone has already been discussed, they can be replaced by other stronger models? or reinforced

Share on Facebook Share on Twitter


banquo

  • Administrator
  • Hero Member
  • *****
  • Posts: 979
    • View Profile
Re: fork
« Reply #1 on: June 10, 2020, 10:20:16 am »
Morning mono; there's a company in Germany who supplies progressive springs as a kit. Wirth is the company. Here's a link to them on UK eBay, but I guess they will be available via eBay.fr

https://www.ebay.co.uk/itm/Moto-Guzzi-Nuovo-Falcone-Wirth-Progressive-Gabelfedern-und-Gabelol/123555021980

Yes; please look here:

https://www.ebay.fr/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=Moto-Guzzi+Nuovo+Falcone+-+Wirth&_sacat=0
« Last Edit: June 10, 2020, 10:22:24 am by banquo »

monohorizontal

  • Newbie
  • *
  • Posts: 38
    • View Profile
Re: fork
« Reply #2 on: June 10, 2020, 11:08:26 am »
salut banquo oui merci je vais étudier ça les ressorts d'origines sont déjà un peu faibles mais en side car c'est encore légèrement plus faible  ;)
Like Like x 1 View List

monohorizontal

  • Newbie
  • *
  • Posts: 38
    • View Profile
Re: fork
« Reply #3 on: June 28, 2020, 06:19:44 pm »
salut banquo j'ai opté pour cette solution simple est efficace 2 entretoises nylon M12 24 mm de diamètre  externe x 15 mm de long  c'est parfait https://www.ebay.fr/itm/12-x-Jet-Black-Nylon-Plastic-SPACERS-Standoff-Washer-M2-M3-M4-M5-M6-M8-M10-M12/302019421824?hash=item4651c2a680:g:v94AAOSwtnpXj6GH   ;)

banquo

  • Administrator
  • Hero Member
  • *****
  • Posts: 979
    • View Profile
Re: fork
« Reply #4 on: July 17, 2020, 09:33:22 am »
Somple. I suppose it's like adding some pre-load...
Was it not difficult to re-fit the caps on top?

monohorizontal

  • Newbie
  • *
  • Posts: 38
    • View Profile
Re: fourchette
« Reply #5 on: July 17, 2020, 02:41:14 pm »
hello by lifting the front of the bike with the jack and pushing the tube down press the cap with a tube and screw by hand quick and very easy the result is very good with 15mm on my sport lighter falcone and 25mm on the blue side car

banquo

  • Administrator
  • Hero Member
  • *****
  • Posts: 979
    • View Profile
Re: fork
« Reply #6 on: July 17, 2020, 03:19:09 pm »
Sounds good mono - quick, cheap and simple!